Shims and Washers

Shims are used to fill a small gap (several microns to several millimetres) between the mechanical surfaces. Shims are used to provide a level support between two surfaces,where washers are used to increase a surface pressure between two objects.

Materials

  • Aluminum
  • Brass
  • Copper
  • Carbon steel
  • Beryllium copper
  • Stainless steel
  • Nickel alloys
  • Kovar
  • Inconel
  • Invar

Samples products

  • Elevation Shims
  • Heat sink shims
  • Bearing Shims
  • Azimuth shims
  • Spacers/Washers
  • Shims from 10um THK (0.0005″)
  • Part sizing from 1mmX1mm (0.040X0.04″) to 18X22″